You may recall a few weeks back we were discussing some recent survey findings relative to the placement of eyewash stations  once one has determined that one needs an eyewash station (or stations). At the time, my dream was to clarify those findings and have them vanish into the ether (which is pretty much where they belong). But alas, that dream crashed upon the rocks of an overreach—can’t say for sure if this signals a sea change or is based on a reluctance to overturn a judgement call in the field. The ruling from the home office read thusly (but not justly): “The organization must do a risk assessment to determine if substances that may be in the sink would not splash onto the person using the eyewash station and inadvertently be contaminated.”
And so, I guess we add an additional imponderable to the equation: How do we install the eyewash station close enough to the area of greatest risk without placing the eyewash in a location that could be adjudged to be too close to the risk area? I suppose the ultimate goal would be to try to remove the hazard entirely, but with all the focus on disinfection and the likelihood that whatever disinfectant in use is going to be firmly in the high-risk zone, that seems unlikely to win favor during survey. Is it possible to “sell” engineering controls to a surveyor that is looking to find things to cite? I think we can all agree that the use of PPE and other forms of engineering controls are probably never going to be the interventions we would hope for them to be, but it is often so difficult to protect folks from themselves.
That said, I suppose it wouldn’t be the worst idea to do a little global evaluation of your eyewash station locations (much like a conjunction function) and add yet another risk assessment to the mix. If you’ve got a survey coming up in the near future, it may save you some aggravation.